Wr.

How to write a screenplay treatment: what goes in it and how long it should be

Updated 12 November 2026. Compiled by the Wr. Sarkhedi desk from the sources listed at the end of this page.

A screenplay treatment is a prose telling of your whole story, written before the script. Write it in the present tense and the third person, with little or no dialogue, covering the main characters, the major plot turns and the tone. Per Wikipedia's film treatment article, retrieved 13 November 2026, a presentation treatment usually runs 7 to 12 pages.

Treatment, logline, beat sheet and step outline compared

DocumentWhat it isFormLength stated in the sources
LoglineThe whole story as one ideaOne or two sentencesNot stated in the sources used here
Beat sheetThe major dramatic turning pointsA short list of beatsNot stated in the sources used here
Step outlineEvery scene, in orderA numbered list, a few lines per sceneA few lines for each scene
Presentation treatmentThe full story in its simplest form, for readers who decideContinuous prose, present tenseAt least 3 and fewer than 30 pages, most 7 to 12
Original draft treatmentA working document built from full scene outlinesContinuous prose, longer and more detailedSome sources give 30 to 80 pages in 12 point Courier

What a treatment is

A film treatment is a piece of prose that describes the story of a planned screenplay. It is normally written in the development stage, before the first draft of the script. It is longer and more detailed than a logline or a one-page synopsis, and it can include the style you intend, which an outline leaves out. A treatment is also made when a novel or a play is adapted, to show how the source will be rebuilt for the screen.

Wikipedia, in its film treatment article retrieved on 13 November 2026, flags several of these points as needing citations, so treat the length figures below as common practice reported by sources and not as a rule.

The format: how a treatment reads

A treatment reads like a short story, but every sentence is in the present tense and describes events as they happen. It is written in the third person, with little or no dialogue. It stays with the main characters, the major plot developments and the tone of the film.

Two kinds of treatment

The sources distinguish two kinds by purpose. The original draft treatment is made while you are writing. It is built from full scene outlines put together, and some sources give lengths between 30 and 80 pages in 12 point Courier. One reported example is the draft treatment of The Terminator, said to be 48 pages long.

The presentation treatment is made for other people. The story is first worked out on index cards or a digital equivalent, with only the essential events of each scene, until the structure holds. It then runs from the concept to the theme, to the character, to a detailed synopsis of about four to eight pages of master scenes. It is the kind to submit if a script submission asks for a treatment, and it is used to leave behind after a pitch.

How long should a treatment be

For a presentation treatment, the sources say at least 3 pages and fewer than 30, with most between 7 and 12. If a submission gives its own page limit, the limit wins. For a working treatment you write for yourself, length does not matter, because nobody else reads it.

A practical way to hit a limit is to write the one-page version first. If the story does not fit on one page, the structure is probably unclear, and extra pages will hide that, not fix it. Our posts on how to write a logline and what a beat sheet is cover the two shorter documents.

Treatment or step outline

A step outline lists the story scene by scene, usually in screen order, with the location and time of day, who is present, the main action and any change in the scene. A treatment tells the same story as continuous prose and does not number the scenes. Many writers write the treatment first to find the story and the step outline second to test it. Our guide to how to outline a screenplay covers the step outline in full.

When to use a treatment

Treatments are widely used in the film industry as selling documents. Screenwriters may use one to pitch a screenplay, or to sell a concept before the script is finished. In television a treatment may present a series or an episode idea before a script is commissioned. Read how to pitch a screenplay for what happens in the room, and screenplay format for the pages that come after.

A step-by-step method

  1. Write the logline in one sentence. If you cannot, stop here.
  2. List the 8 to 12 turning points of the story as a beat sheet.
  3. Write one paragraph for each turning point, in the present tense.
  4. Join the paragraphs and cut every sentence that does not move the story or show the tone.
  5. Read it aloud. Remove any line that explains a feeling the action should show.
  6. Cut to the page limit you were given, or to 7 to 12 pages if you were given none.

What the sources cannot tell you

No body sets the format of a treatment. The figures here come from a general reference article that itself asks for better citations, and from the American Film Institute Desk Reference (2002, page 173), which that article cites for the description of the format. Check any competition or producer guideline before you write.

What this notebook adds

A good treatment lets a stranger retell your story after one reading. This notebook has more than 80 posts on craft, and this is the first on the treatment, which sits between the logline and the script.

Questions people ask

What is a screenplay treatment?

A prose telling of the whole story of a planned screenplay, written in the present tense, before the script. It covers the main characters, the major plot developments and the tone, with little or no dialogue.

How long is a screenplay treatment?

A presentation treatment is usually at least 3 and fewer than 30 pages, and most are 7 to 12, according to Wikipedia's film treatment article retrieved 13 November 2026. Working draft treatments can run 30 to 80 pages in some sources.

What is the difference between a treatment and a synopsis?

A treatment is longer and more detailed than a one-page synopsis. It may include notes on directorial style that a synopsis or outline leaves out.

Do I write a treatment before or after the script?

Before. A treatment is normally written in development, ahead of the first draft. Some writers also write one after a draft to pitch the story.

Should a treatment include dialogue?

Little or none. The sources describe treatments as mostly action in prose. A single line is fine if it carries the film.

Is a treatment the same as a step outline?

No. A step outline lists every scene in order, a few lines each, and a treatment tells the story as continuous prose.

Read next

Sources

  1. Wikipedia, Film treatment (formerly Treatment (filmmaking)) (retrieved 13 November 2026)
  2. Wikipedia, Step outline (retrieved 13 November 2026)
  3. Corey and Ochoa (eds.), The American Film Institute Desk Reference, Dorling Kindersley, 2002, p. 173, as cited by Wikipedia (2002 edition, cited 13 November 2026)